Do it yourself
Frequently asked questions about cars and motorcycles

Reset the Tire Pressure Light on the Volvo XC40

Model: Volvo Xc40 MK 1 - Years 2017-2026
Part:

This guide provides instructions on how to reset the tire pressure light on the Volvo XC40. Before resetting the TPMS sensors, ensure all four tires are at the proper operating pressure. First, get in the vehicle and turn on the ignition. Next, navigate to the vehicle settings and then to the tire pressure section, confirming and recalibrating the TPMS sensors as shown in the video. At this point, turn off the ignition and start the engine, verifying that the tire pressure light has been successfully reset.

Posted on 3 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Volvo Xc40 (2017-2026 / MK 1) Resetting the tire pressure light on the Volvo XC40 is a simple task you can do on your own. This short video tutorial will guide you step by step. F…
Volvo Xc40 (2017-2026 / MK 1) In this tutorial, you will see how to reset the tire light on a Volvo XC40. This operation is extremely simple and quick, and should be done only aft…
Volvo Xc40 (2017-2026 / MK 1) This brief video tutorial shows the steps necessary to reset the tire pressure light on a first-generation Volvo XC40. Before performing this operati…

Other guides you may be interested in

How to Replace the Battery on a Honda Vision 110

To replace the battery on a Honda Vision 110, you need to remove the front fairing of the motorcycle, located directly under the front headlamp. To loosen this panel, unscrew the two screws found at its top, just below the handlebar. Once these screws are loosened, lever under the panel to detach it, gaining access to the battery underneath: this battery must be removed from its housing by unscrewing the fixing screws and disconnecting the power cables, replacing it with a new one.

Watch the video!


by ScegliAuto

More videos