Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Maintenance Reminder on a Volvo XC60

Model: Volvo Xc60 MK 1 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Service warning light

See other generations:
Video tutorial

Let's see how to reset the maintenance reminder message on a Volvo XC60 (the same procedure also applies to the XC90): turn the ignition key to position I (dashboard on, engine off), then press and hold the reset button for the trip odometer (the small button that resets the trip mileage) and turn the key to position II within about 2 seconds, continuing to hold the button.

Keep holding the button: after about 10 seconds, when the small "i" light starts flashing.

Now you can release the button (within 4 seconds of the light starting to flash). You will hear a beep: this indicates that the maintenance message has been reset.

Turn off the ignition and wait at least 3 minutes for the system to fully reset.


Posted on 16 June 2026 by ScegliAuto


Related tutorials

Resetting Maintenance Reminder on Volvo XC60
Resetting Maintenance Reminder on Volvo XC60
Volvo Xc60 (2017-2026 / MK 2) Let's go over the steps needed to reset the maintenance reminder on the Volvo XC60. First, get in the vehicle and press and hold the reset button loc…
How to reset the maintenance service reminder on the Volvo XC60
How to reset the maintenance service reminder on the Volvo XC60
Volvo Xc60 (2017-2026 / MK 2) Today we will discover the information that will allow us to reset the regular maintenance warning (service) on the Volvo XC60. First, we get into th…
How to Reset the Service Light on a Volvo XC60
How to Reset the Service Light on a Volvo XC60
Volvo Xc60 (2008-2016 / MK 1) Here is the procedure to reset the service light for routine maintenance on the Volvo XC60. First, get inside the cabin and turn on the ignition whil…

Other guides you may be interested in

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos