Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Cabin Air Filter in Your Vehicle

Model: Volvo S40 MK 2 - Years: 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012
Part: Cabin air filter

See other generations:
Video tutorial

If you own a Volvo S40 and want to replace the cabin air filter, this video will help you. The filter is located in the driver's footwell. First, remove the plastic screw that secures the fabric cover and lift it up: this will give you access to a white plastic screw that must also be unscrewed using your fingers.

Remove the cover and take out the old filter. Place the new filter in its compartment using both hands, reattach the cover, and screw back the white screw that secured it. Replace the fabric cover as it was before and secure the plastic screw.


Updated on 4 February 2026 by ScegliAuto


Related tutorials

Replacement of the Engine Air Filter
Replacement of the Engine Air Filter
Volvo S40 (1995-2004 / MK 1) This short video illustrates the procedure for replacing the engine air filter on a Volvo S40. First, unclip the four clips that hold the filter box …
How to Replace the Cabin Air Filter in a Volvo S40
How to Replace the Cabin Air Filter in a Volvo S40
Volvo S40 (2004-2012 / MK 2) Here are the instructions on how to replace the cabin air filter in your Volvo S40. The steps are simple and are as follows. First, remove the accele…
How to Replace the Cabin Filter of a Volvo S40
How to Replace the Cabin Filter of a Volvo S40
Volvo S40 (1995-2004 / MK 1) How to replace the cabin filter of a Volvo S40? Start by removing it. The cabin filter is located at the bottom right of the glove compartment. Use a…

How to lower the rear seats in the Peugeot 206?

In this tutorial, you will see how to lower the rear seats in the Peugeot 206, a very simple and quick operation, for example, if you need more space in the boot. First, open both the doors and the tailgate, then unclip the seat base and position it vertically. Next, remove the horizontal partition, locate the release levers at the ends of both seatbacks, and, by operating them, lower the seatbacks. To reassemble everything, simply follow the reverse procedure.

Watch the video!


by ScegliAuto

More videos