Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of Gearbox Oil

Model: Volvo S80 - Years 1998-2006
Part: Transmission fluid

If problems with gear engagement arise after many miles, you should replace the oil in the gearbox. Lift the vehicle on a ramp. After loosening some bolts of the sump, allow the oil to drain into a suitable container. Completely remove the sump and clean it, especially near the magnets, to remove any metallic debris. Replace the gasket, close the sump, and top up the gearbox with the correct amount of the appropriate oil. Check the engine oil level and take the vehicle for a test drive to see if the automatic gearbox issues have been resolved. Do not dispose of used oil in the environment; take it to the appropriate collection centres.

Updated on 5 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Oil Change Service on Volvo S80
How to Reset the Oil Change Service on Volvo S80
Volvo S80 (2006-2016 / MK 2) Open the driver’s door and access the cabin, insert the key into the ignition slot. Locate the button: "T1 T2" on the right side of the instrument pa…
Replacing Engine Oil and Oil Filter
Volvo S80 (1998-2006 / ) Lift the vehicle and secure it with appropriate supports to prevent it from falling. The necessary tools are a ratchet spanner, a set of fixed spanne…
Resetting the maintenance service indicator light of the Volvo S80.
Resetting the maintenance service indicator light of the Volvo S80.
Volvo S80 (1999-2006 / MK 1) Let's discover the information that will allow us to reset the regular maintenance reminder for the engine oil change (service) on the Volvo S80. Fir…

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos