Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Engine Spark Plugs

Model: Volvo S60 MK 1 - Years: 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
Part: Spark plugs

See other generations:
Video tutorial

To access the spark plugs, start by removing the engine cover by loosening the relevant bolts with a ratchet wrench. To avoid mixing up the wires, label the various spark plugs.

Using a ratchet wrench, unscrew the retaining screw of the coil connected to the first spark plugs and pull the connector straight up. Check the number on the coil and the one on the connectors. At the bottom of the well is the first spark plug.

Before proceeding with removal, thoroughly clean the wells with compressed air to eliminate any dirt that could fall into the combustion chamber. Using the appropriate spark plug socket, which has a rubber gripping device, gently insert it onto the spark plug and unscrew it. Be careful not to drop foreign objects into the well.

Replace the spark plug with one of the same model, carefully inserting it into the well, always using the appropriate socket and turning it gently to ensure it threads correctly. If you feel resistance, remove it and try again.

The spark plugs should be tightened with a torque wrench; if you do not have one, tighten them without overdoing it. Repeat the same process for the other spark plugs.


Updated on 6 February 2026 by ScegliAuto


Related tutorials

Replacing Spark Plugs and Connectors
Replacing Spark Plugs and Connectors
Volvo S60 (2000-2009 / MK 1) To replace the spark plugs, remove the rear engine cover by unscrewing the perimeter screws and the timing belt cover. After removing the covers, dis…
Replacing Engine Spark Plugs
Replacing Engine Spark Plugs
Volvo S60 (2000-2009 / MK 1) Using a 30 lb-ft torque wrench, remove the screws securing the left upper plastic engine cover. Take off the cover. Check the timing belt for any sig…
Timing Belt Replacement for Volvo S60 2.0L
Timing Belt Replacement for Volvo S60 2.0L
Volvo S60 (2010-2018 / MK 2) Today, let's go over the main instructions on how to remove and replace the timing belt on the Volvo S60 with a 2.0L engine. In this case, the timing…

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos