Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Engine Spark Plugs

Model: Volvo S60 MK 1 - Years: 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
Part: Spark plugs

See other generations:
Video tutorial

Using a 30 lb-ft torque wrench, remove the screws securing the left upper plastic engine cover. Take off the cover.

Check the timing belt for any signs of damage or wear. Remove the upper engine exhaust manifold.

Disconnect the rear electronic cable from its seat. Remove the remaining part of the engine cover.

Disconnect the spark plug power cable. Remove the upper securing screw and then take out the spark plug.

Use a small vacuum to clean the spark plug hole. Remove the old spark plug and replace it with a new one. Check the correct gap between the spark plug electrodes.

To protect the spark plug, it is advisable to apply a special stick to preserve it, increasing its lifespan and reliability. Volvo S60


Updated on 3 February 2026 by ScegliAuto


Related tutorials

Replacing Spark Plugs and Connectors
Replacing Spark Plugs and Connectors
Volvo S60 (2000-2009 / MK 1) To replace the spark plugs, remove the rear engine cover by unscrewing the perimeter screws and the timing belt cover. After removing the covers, dis…
Replacing Engine Spark Plugs
Replacing Engine Spark Plugs
Volvo S60 (2000-2009 / MK 1) To access the spark plugs, start by removing the engine cover by loosening the relevant bolts with a ratchet wrench. To avoid mixing up the wires, la…
Timing Belt Replacement for Volvo S60 2.0L
Timing Belt Replacement for Volvo S60 2.0L
Volvo S60 (2010-2018 / MK 2) Today, let's go over the main instructions on how to remove and replace the timing belt on the Volvo S60 with a 2.0L engine. In this case, the timing…

Other guides you may be interested in

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos