Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Instrument Cluster Glass Replacement on Volvo

Model: Volvo Volvo Various

In this video tutorial, you will learn how to disassemble and replace the glass of the dashboard display on various Volvo models. First, remove the instrument cluster by taking off the plastic trims, unscrewing the fixing screws, and disconnecting the electrical connector at the back. Once disassembled, pry on the sides where you find the clips and remove the adhesive present on the edges; use a lever to remove the glass and clean the area before fitting the new one. Then, reassemble it by applying the adhesive properly and subsequently reassemble everything.

Updated on 30 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the fuse of the power window motor of the 2019 Volvo Trucks
How to replace the fuse of the power window motor of the 2019 Volvo Trucks
Volvo Volvo Various Today we will explain how to replace the fuse of the right window motor of the 2019 Volvo Trucks. First of all, we get on board the vehicle and immed…
How to Remove the Instrument Cluster from a Volvo 850
How to Remove the Instrument Cluster from a Volvo 850
Volvo Volvo Various How do you remove the instrument cluster from a Volvo? Here’s how to disassemble the components. Remove the air vents; use a screwdriver to unscrew t…
How to Repair the Speedometer of the Volvo 850
How to Repair the Speedometer of the Volvo 850
Volvo Volvo Various In this video tutorial, you will see the steps to disassemble and repair the instrument cluster and speedometer of the Volvo 850. First, get inside t…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos