Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Shift Knob Volvo XC90

Model: Volvo Xc90 MK 1 - Years 2002-2014
Part: Shift knob

Today, you will learn how to remove the shift knob in a Volvo XC90 in simple steps. First, get inside the vehicle and use a trim tool to remove the plastic piece located under the shift lever; then grasp the shift knob and pull it upwards with force. At this point, insert the new shift knob and ensure it fits securely; if desired, place a zip tie between the boot and knob to secure everything. Finally, reposition the lower trim pieces and snap them back in place, as shown in the video tutorial.

Updated on 30 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Shifter Knob Replacement
Shifter Knob Replacement
Volvo Xc90 (2002-2014 / MK 1) Start the engine and place the shifter in the Neutral position; detach the trim located just below the shifter along the center console; remove the l…
Removing Radio, Central Control Unit Volvo XC90
Removing Radio, Central Control Unit Volvo XC90
Volvo Xc90 (2002-2014 / MK 1) In this video tutorial, you will learn how to remove the radio and central console of a Volvo XC90. First, get inside the vehicle with a plastic trim…
How to Remove the Radio from a Volvo XC90?
How to Remove the Radio from a Volvo XC90?
Volvo Xc90 (2002-2014 / MK 1) To remove the radio from a Volvo XC90, pry under the cover that surrounds the gear shift lever to free it from its retaining clips and completely rem…

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos