Do it yourself
Frequently asked questions about cars and motorcycles

Clean the Throttle Control System

Model: Volvo V70 MK 1 - Years: 1996, 1997, 1998, 1999, 2000
Part: Throttle body

See other generations:
Video tutorial

If there are fuelling issues with fluctuations in engine revs, it is necessary to clean the throttle control system. The first step is to unscrew the air hose clamp, fuel lines, and the electrical connector.

Remove the throttle body by taking off the four fixing bolts to check the dirtiness of the regulator. Once the complete body is removed, use a brush and a tray with solvent to clean it thoroughly.

If the throttle is not touched, calibration is not necessary. Refit the body, hoses, and connector.

Perform a test to ensure correct operation.


Updated on 6 February 2026 by ScegliAuto


Related tutorials

Volvo V70 (2007-2016 / MK 3) In this tutorial, you will see how to adjust the handbrake on a Volvo V70, a very simple and quick operation. First, park the vehicle on a level surf…
Volvo V70 (2000-2007 / MK 2) Below are the steps to adjust the handbrake cable on a Volvo V70. First, get inside the vehicle and start by removing the plastic cover of the handbr…
Volvo V70 (2000-2007 / MK 2) The information provided in this guide will show us how to carry out the inspection and adjustment of the handbrake of the Volvo V70. To ensure prope…

Other guides you may be interested in

How to open the bonnet on a Volkswagen Golf?

In this tutorial, you will see how to open the bonnet on a Volkswagen Golf MK4. This is a very simple operation that follows the standard procedure. First, open the driver's door, then locate the lever in the lower left area and pull it. Next, move to the front of the vehicle, lift the bonnet slightly, and find the second lever located just above the Volkswagen logo. At this point, simply pull it towards you, fully open the bonnet, and secure it with the prop rod. To close it, gently push it down.

Watch the video!


by ScegliAuto

More videos