Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Radio from a Volvo XC60

Model: Volvo Xc60 MK 1 - Years 2008-2016
Part: Car stereo

Want to remove the radio from your Volvo XC60? Let's see how to take off the covering plastics to access the radio. Use a plastic trim tool to remove the upper dashboard cover frame, then, with a screwdriver, unscrew the securing screws located above the front of the radio cover panel. Next, unscrew the screws at the back of the dashboard. Pull off the plastic piece under the radio and the dashboard itself. Unscrew the side securing screws and then remove the radio. Disconnect the various power connectors located at the back.

Updated on 11 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Rear Headlight of a Volvo XC60
Volvo Xc60 (2008-2016 / MK 1) Start by opening the trunk of your Volvo XC60, then remove the cover located on the inner side of the cargo area. Next, disconnect all the electrical…
How to Remove the Rear Light of a Volvo XC60
Volvo Xc60 (2008-2016 / MK 1) Begin by opening the trunk of your Volvo XC60. Next, remove the cover located on the left inner side of the cargo area. Then, disconnect all the elec…
How to Remove the Door Panel of the Volvo XC60?
How to Remove the Door Panel of the Volvo XC60?
Volvo Xc60 (2017-2026 / MK 2) To remove the door panel of the Volvo XC60, use a tool like a screwdriver to pry off the fabric cover of the inner handle area. Next, lift the window…

How to Replace the Battery on a Honda Vision 110

To replace the battery on a Honda Vision 110, you need to remove the front fairing of the motorcycle, located directly under the front headlamp. To loosen this panel, unscrew the two screws found at its top, just below the handlebar. Once these screws are loosened, lever under the panel to detach it, gaining access to the battery underneath: this battery must be removed from its housing by unscrewing the fixing screws and disconnecting the power cables, replacing it with a new one.

Watch the video!


by ScegliAuto

More videos