Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of the timing belt of the Volvo XC60 2.0

Model: Volvo Xc60 MK 1 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Timing belt

See other generations:
Video tutorial

Today we will see the main instructions on how to disassemble and replace the timing belt of the Volvo XC60 2.0. First, we open the hood of the car and start disassembling and removing the engine support on the distribution side, unscrewing the fixing screws; then we remove the side tray and the distribution cover, as shown in the video.

At this point, we lift the car and remove the right front wheel; disconnect the V-belt and remove the crankshaft pulley, then proceed with the replacement of the timing belt!


Posted on 15 September 2026 by ScegliAuto


Related tutorials

Replacing the Timing Belt on a Volvo XC60
Replacing the Timing Belt on a Volvo XC60
Volvo Xc60 (2017-2026 / MK 2) The process of replacing the timing belt on a vehicle is quite complex. Here are the main steps to follow: First, lift the car on a lift and open the…
How to replace the timing belt on a Volvo XC60?
How to replace the timing belt on a Volvo XC60?
Volvo Xc60 (2008-2016 / MK 1) To replace the timing belt on a Volvo XC60, open the hood to access the left side panel screws of the engine block: underneath, you will find the tim…
How to Replace the Timing Belt on a Volvo XC60?
How to Replace the Timing Belt on a Volvo XC60?
Volvo Xc60 (2008-2016 / MK 1) To replace the timing belt on a Volvo XC60, open the hood to access the bolts securing the left engine cover panel. Underneath, you will find the tim…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos