Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Timing Belt on a Volvo XC60

Model: Volvo Xc60 MK 2 - Years 2017-2026
Part: Timing belt

The process of replacing the timing belt on a vehicle is quite complex. Here are the main steps to follow: First, lift the car on a lift and open the hood. Remove the soundproofing panel under the engine, take off the front right wheel and the inner fender, loosen the accessory belt tensioner, and remove it. From the top of the engine compartment, remove the right engine mount and the protective cover for the upper and lower belts, then remove the water pump. This way, you will finally have access to the belt and can remove it by loosening the tensioner.

Updated on 30 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacement of the timing belt of the Volvo XC60 2.0
Replacement of the timing belt of the Volvo XC60 2.0
Volvo Xc60 (2008-2016 / MK 1) Today we will see the main instructions on how to disassemble and replace the timing belt of the Volvo XC60 2.0. First, we open the hood of the car a…
How to replace the timing belt on a Volvo XC60?
How to replace the timing belt on a Volvo XC60?
Volvo Xc60 (2008-2016 / MK 1) To replace the timing belt on a Volvo XC60, open the hood to access the left side panel screws of the engine block: underneath, you will find the tim…
How do you replace the timing belt of the Volvo XC60?
How do you replace the timing belt of the Volvo XC60?
Volvo Xc60 (2008-2016 / MK 1) The operation of replacing the timing belt on the Volvo XC60 is carried out by opening the hood, so that it is possible to loosen the fastening screw…

Other guides you may be interested in

How to Replace the External Wing Mirror on a Ford C MAX

In the event of a breakage, it will be necessary to replace the external wing mirror on the 2011 Ford C MAX. This operation is easily performed independently. Start by removing the internal cover of the mirror with a plastic lever. Then, use a socket wrench to remove the securing pins. Once the pins are removed, you can take off the mirror, but not before disconnecting the power connectors. Then proceed to fit the new mirror. First, connect the connectors and then secure the mirror to its housing with the pins. Refit the plastic cover and test the operation of the electric mirror using the controls.

Watch the video!


by ScegliAuto

More videos