Do it yourself
Frequently asked questions about cars and motorcycles

Instructions for changing the timing belt of the Volvo XC60 D4 Diesel.

Model: Volvo Xc60 MK 2 - Years: 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026
Part: Timing belt

See other generations:
Video tutorial

In this video we see some general indications on how to change the timing belt of a Volvo XC60 D4 diesel. We will need to remove the right front wheel and fender.

We will need to lock the serpentine belt located just below with a specific tool. We see the points where to place the stops, which must be marked with a visible marker; the sprocket, the injection pump is another point and then the crankshaft at the point where the youtuber shows us. For disassembly, we must start with the crankshaft pulley, removing the four central screws, then the tensioner pulley, the guide roller and the water pump: all accessories that we take the opportunity to change.

We first change the water pump, then we change the tensioner roller and the other small roller. The last thing to reinstall is the injection pump, where we must tighten the four screws.

Now we can put the belt back in place, and we make the engine run a few times to see if it is properly positioned. We check the timing points and we should be good to go.


Posted on 19 December 2024 by ScegliAuto


Related tutorials

Volvo Xc60 (2017-2026 / MK 2) The timing belt is a crucial component that connects and operates various engine parts. Let's explore the replacement information for the Volvo XC60 …
Volvo Xc60 (2008-2016 / MK 1) Today we will see the main instructions on how to disassemble and replace the timing belt of the Volvo XC60 2.0. First, we open the hood of the car a…
Volvo Xc60 (2008-2016 / MK 1) To replace the timing belt on a Volvo XC60, open the hood to access the bolts securing the left engine cover panel. Underneath, you will find the tim…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos