Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Battery Replacement on Volvo XC60

Model: Volvo Xc60 MK 1 - Years 2008-2016
Part: Battery

With the vehicle off and the key removed, lift the hood and locate the battery position: it is near the windshield on the driver’s side. Remove the upper cover by hand. Move the gasket just enough to unscrew and remove the second part of the panel. The two battery terminals are secured by 10 mm bolts that you will need to unscrew, starting with the negative terminal and then moving to the positive. Unscrew another 10 mm bolt that secures the battery to the vehicle and remove the battery. Reverse the steps for installation.

Updated on 13 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Battery replacement for the Volvo XC60
Battery replacement for the Volvo XC60
Volvo Xc60 (2017-2026 / MK 2) These brief and simple steps will show us how to disassemble and replace the battery of the Volvo XC60. First, let's open the rear hatch of the trunk…
How to Replace the Key Battery in a Volvo XC60
How to Replace the Key Battery in a Volvo XC60
Volvo Xc60 (2008-2016 / MK 1) To correctly and safely replace the battery inside the smart key of your Volvo XC60 MK1, you only need a common flathead screwdriver and a couple of …
How do you replace the battery of the Volvo XC60 remote control?
How do you replace the battery of the Volvo XC60 remote control?
Volvo Xc60 (2017-2026 / MK 2) To replace the battery of the Volvo XC60 remote control, you need to pry with an object in order to detach the front and back covers of the remote co…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos