Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Maintenance Reminder for the Volvo V60

Model: Volvo V60 MK 1 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Warning light – error code

See other generations:
Video tutorial

If you have an issue with the maintenance reminder system in a new car like the Volvo V60, you can easily reset it in a few steps. First, make sure your car is off. Using the knob located to the left of the steering wheel, select T2 on the screen.

Press OK. Then, press the start/stop button, hold down the OK button, and keep holding the start/stop button until you see an eye flashing in the upper right corner of the screen. If you hear a loud beep, that’s how it should happen because it means the maintenance reminder has already been reset.

You can also check the messages to see if there are any issues, and you’re done with the reset.


Updated on 29 April 2026 by ScegliAuto


Related tutorials

How to reset the maintenance light on the Volvo V60
How to reset the maintenance light on the Volvo V60
Volvo V60 (2018-2026 / MK 2) If the maintenance light appears on the instrument panel of your second-generation Volvo V60 even after having carried out the service at a specializ…
How to Reset the Maintenance Light on a Volvo V60
How to Reset the Maintenance Light on a Volvo V60
Volvo V60 (2018-2026 / MK 2) Today, you will learn the main instructions to reset the maintenance light on a Volvo V60. First, get inside the cabin and press and hold the reset b…
How to Reset the Service Light on a Volvo V60
How to Reset the Service Light on a Volvo V60
Volvo V60 (2010-2018 / MK 1) To reset the Service light on a Volvo V60, press and hold the OK button located at the end of the lever on the left side of the steering wheel. While…

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos