Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Speaker in a Volvo XC70

Model: Volvo Xc70 MK 3 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Speaker

See other generations:
Video tutorial

Let's see how to remove the speaker from the Volvo XC70. Use a trim tool to remove the plastic at the corner of the window. With a screwdriver, unscrew the securing screws located in the plastic handle and throughout the surface of the door panel.

Once all the screws are removed, use the trim tool to detach the door panel: disconnect any power connectors and release cables. Unscrew the screws securing the speaker mounted in the door with a screwdriver.

Remove the speaker and disconnect the electrical connector. Install a new speaker in the door: connect the electrical connector and screw in the securing screws.


Updated on 5 May 2026 by ScegliAuto


Related tutorials

How to Replace the Battery on a Volvo XC70?
How to Replace the Battery on a Volvo XC70?
Volvo Xc70 (2007-2016 / MK 3) To replace the battery on a Volvo XC70, open the bonnet to access the components in the engine bay. Here, locate the battery at the top right of the …
Replacing the Timing Belt on the Volvo XC70
Replacing the Timing Belt on the Volvo XC70
Volvo Xc70 (2007-2016 / MK 3) This guide will illustrate the main steps to dismantle and replace the timing belt on the Volvo XC70. First, open the bonnet and begin removing the e…
How to Replace the Cabin Fan Resistor on a Volvo XC70?
How to Replace the Cabin Fan Resistor on a Volvo XC70?
Volvo Xc70 (2007-2016 / MK 3) To replace the cabin fan resistor on a Volvo XC70, start by removing the side cover of the centre console located near the driver's footwell. Once th…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos