Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Headlight on a Volvo XC60?

Model: Volvo Xc60 MK 2 - Years 2017-2026
Part: Tail light

To replace the rear headlight on a Volvo XC60, first open the trunk and loosen the screw located near the headlight to be removed. The next step is to remove the interior pillar panels by disengaging the retaining clips and removing the seat belt anchors. This will allow you to access the bolts located inside the cabin. The headlight is secured by screws located at the bottom, which require the removal of the bumper to access. By unscrewing the bolts inside the wheel well and at the bottom of the bumper, you can detach it enough to access the lower screws of the headlight. By loosening these screws and disconnecting the corresponding connectors, you can replace the headlight.

Updated on 15 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Tail Light on a Volvo XC60
Volvo Xc60 (2017-2026 / MK 2) To change the tail light on your Volvo XC60, access it from the trunk. Near the light, there is a panel in the trim that you will easily remove. Usin…
How to Replace the Remote Battery in a Volvo XC60?
How to Replace the Remote Battery in a Volvo XC60?
Volvo Xc60 (2017-2026 / MK 2) In this tutorial, you will see how to replace the remote battery in a Volvo XC60, an extremely simple and quick operation. For this, you will need a …
How do you remove the rear taillight of the Volvo XC60?
How do you remove the rear taillight of the Volvo XC60?
Volvo Xc60 (2008-2016 / MK 1) The removal of the rear light of the Volvo XC60 is done by opening the rear door, so that it is possible to access the screws located next to the cor…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos