Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on a Volvo XC40?

Model: Volvo Xc40 MK 1 - Years 2017-2026
Part: Service warning light

You performed the service yourself on the Volvo XC40 and now you don't know how to turn off the service light? Follow the video instructions. Start by turning the ignition knob clockwise once. After that, press and hold the cruise control button located on the steering wheel (on the left) and start the car by pressing the brake pedal and turning the ignition knob clockwise again. Continue holding the cruise control button until you see the service light flashing on the display. At this point, you can release the button: you will notice that the service light has been reset!

Updated on 22 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Resetting the Maintenance Reminder for the Volvo XC40
Resetting the Maintenance Reminder for the Volvo XC40
Volvo Xc40 (2017-2026 / MK 1) Let's briefly discover the step-by-step instructions on how to reset the maintenance reminder light for the Volvo XC40. First, get in the vehicle and…
Reset the Service Light on the Volvo XC40
Reset the Service Light on the Volvo XC40
Volvo Xc40 (2017-2026 / MK 1) The information in this guide will allow you to reset the service light for the regular maintenance oil change on the Volvo XC40. First, get in the v…
How to Reset the Service Light on a Volvo XC40
How to Reset the Service Light on a Volvo XC40
Volvo Xc40 (2017-2026 / MK 1) Below are the steps and instructions to reset the service light for the regular oil change maintenance on a Volvo XC40. First, get in the cabin and p…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos