Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on a Volvo XC40

Model: Volvo Xc40 MK 1 - Years 2017-2026
Part: Service warning light

Below are the steps and instructions to reset the service light for the regular oil change maintenance on a Volvo XC40. First, get in the cabin and press and hold the reset button located at the bottom left of the steering wheel. Turn on the ignition and wait for the yellow service light to stop flashing, as shown in the video. At this point, turn off the instrument panel and start the engine, verifying that the maintenance message has been successfully reset from the digital display.

Posted on 8 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Service Light on a Volvo XC40
How to Reset the Service Light on a Volvo XC40
Volvo Xc40 (2017-2026 / MK 1) Let's discover how to reset the service light for the regular maintenance oil change on the Volvo XC40. First, get in the vehicle and press and hold …
Resetting the Tire Pressure Monitoring System (TPMS) Light on the Volvo XC40
Resetting the Tire Pressure Monitoring System (TPMS) Light on the Volvo XC40
Volvo Xc40 (2017-2026 / MK 1) This guide briefly outlines the steps to reset the tire pressure monitoring system (TPMS) light on the Volvo XC40. Before recalibrating the TPMS sens…
How do you reset the Service light on the Volvo XC40?
How do you reset the Service light on the Volvo XC40?
Volvo Xc40 (2017-2026 / MK 1) The procedure for resetting the Service light on the Volvo XC40 involves pressing and holding the - button located on the left side of the steering w…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos