Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Tail Light on a Volvo XC60

Model: Volvo Xc60 MK 2 - Years: 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026
Part: Tail light

See other generations:
This video is currently unavailable

To change the tail light on your Volvo XC60, access it from the trunk. Near the light, there is a panel in the trim that you will easily remove.

Using a ratchet wrench, which will allow easier access to the compartment, remove the bolts securing the light assembly. (In the video, the person performing the repair prefers to remove the entire panel for easier access instead of using the designated compartment.

They also decide to loosen the rear bumper; you can judge if this is necessary.

However, they also removed the rear hatch to do this job.) Disconnect the connectors that link the light assembly to the electrical system and take it out of its housing. Now you can take your new light assembly, reposition it by reconnecting the connectors, and secure it with its screws from inside the trunk.

Finally, replace the trim panel in its place. The job is done.


Updated on 22 May 2026 by ScegliAuto


Related tutorials

How to disassemble the rear light of the Volvo XC60
How to disassemble the rear light of the Volvo XC60
Volvo Xc60 (2008-2016 / MK 1) Today we will discover the information and instructions that will allow us to disassemble and replace the rear taillight of the Volvo XC60. First, we…
How to Remove the Rear Headlight of a Volvo XC60
Volvo Xc60 (2008-2016 / MK 1) Start by opening the trunk of your Volvo XC60, then remove the cover located on the inner side of the cargo area. Next, disconnect all the electrical…
How to Remove the Rear Headlight of the Volvo XC60?
How to Remove the Rear Headlight of the Volvo XC60?
Volvo Xc60 (2017-2026 / MK 2) To remove the rear headlight of the Volvo XC60, open the trunk to access the screws located next to the headlight, which are covered by the trunk lid…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos