Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Key Battery in a Volvo XC60

Model: Volvo Xc60 MK 1 - Years 2008-2016
Part: Key

In this video, you will learn how to replace the key battery in your Volvo XC60. The first step is to turn the key over, where you will find a plastic cover: at the top (near the keyring), there is a small slot; use a flathead screwdriver to pry it off. At this point, you will find the CR2032 battery; use the screwdriver again to remove it. Now, insert the new battery with the negative side facing in and the positive side facing you. Finally, reinsert the cover by applying slight pressure to snap it back into place.

Updated on 27 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Key Battery in a Volvo XC60
How to Replace the Key Battery in a Volvo XC60
Volvo Xc60 (2008-2016 / MK 1) To correctly and safely replace the battery inside the smart key of your Volvo XC60 MK1, you only need a common flathead screwdriver and a couple of …
How to replace the battery in the Volvo XC60?
How to replace the battery in the Volvo XC60?
Volvo Xc60 (2008-2016 / MK 1) In this tutorial, we can see how to replace the battery in the Volvo XC60, an extremely simple and quick operation. First of all, make sure that the …
How to Replace the Battery in the Volvo XC60
How to Replace the Battery in the Volvo XC60
Volvo Xc60 (2008-2016 / MK 1) With the following guide, you will finally be able to replace the battery in your Volvo XC60 independently and safely. First, turn off the car and ma…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos