Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Volvo
    3. :
  3. S40
    4. : How to replace the remote control battery in Volvo S40?

Volvo S40 - Video tutorial

Model: Volvo S40 MK 2 - Years 2004-2012
Part: Key
Operation: How to replace the remote control battery in Volvo S40?

Replacing the Volvo S40 remote control battery, as we can see in this tutorial, is an extremely simple and inexpensive operation. To do this, we will need a spare CR2450 type battery and a small flat tip screwdriver. First of all, identify the slot indicated, located along the lower edge, then insert the tip of the screwdriver inside and unlock the door by levering it. Once this is done, remove the old battery and insert the spare one, taking care to respect the polarity. Finally, we put the door back.


Posted on 31 May 2024 by ScegliAuto



How do I replace the remote control battery of the Volvo S40?
Volvo S40 (2004-2012 / MK 2) The replacement of the remote control battery of the Volvo S40 is possible by pressing the appropriate button at the top of the device to be able to
Volvo S40 battery replacement
Volvo S40 (2004-2012 / MK 2) Volvo S40 battery change? We disassemble the Volvo battery if it is faulty and not rechargeable. We open the car door and pull up the engine compartm
What is the fuse layout of the Volvo S40?
Volvo S40 (2004-2012 / MK 2) If some of the devices in our Volvo S40 have suddenly stopped working, the first thing we can do is check the status of the corresponding fuses, whos

Other guides that may interest you

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos