Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replace the Indicator Switch on the Volvo S80

Model: Volvo S80 MK 2 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016

See other generations:
Video tutorial

In this video, follow the steps to remove and replace the lever or indicator switch (turn signal) on the Volvo S80. First, get inside the vehicle and start by removing the plastic cover behind the steering wheel, unscrewing the screws at the bottom with a Torx screwdriver; once the cover is removed, disconnect the electrical connector from the stalk switch to remove it, as illustrated in the video.

Now, replace it with the new one, connecting it correctly and reassembling everything, following the video until the end!


Updated on 30 May 2026 by ScegliAuto


Related tutorials

Where is the Fuse Box Located on a Volvo S80
Volvo S80 (2006-2016 / MK 2) In this mini guide dedicated to your second-generation Volvo S80, we will discover where the fuse box containing all the various fuses is located. Wi…
How to Replace the Battery on the Volvo S80
How to Replace the Battery on the Volvo S80
Volvo S80 (2006-2016 / MK 2) These brief and simple instructions will show you how to remove and replace the battery on the Volvo S80. First, open the bonnet of the vehicle and s…
How to Replace the Timing Belt on a Volvo S80
How to Replace the Timing Belt on a Volvo S80
Volvo S80 (1999-2006 / MK 1) To replace the timing belt on a Volvo S80, open the bonnet and detach the cover on the left side of the engine block. You will also need to loosen th…

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos