Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of the Exhaust Manifold

Model: Volvo S70 MK 1 - Years: 1996, 1997, 1998, 1999, 2000
Part: Engine

Video tutorial

The exhaust manifold is a crucial component for the proper functioning of the vehicle. It is made of metal and serves to collect carbon monoxide and other harmful gases produced and disperse them into the environment.

It may happen that the manifold is loose; in that case, tighten the bolts that secure it to the vehicle. You can also proceed to remove the part; stop the car, open the bonnet, and locate the part, while also welding any cracks you find and reassembling the manifold in the same way as before.

Not replacing a visibly damaged manifold puts both yourself and the engine at risk.


Updated on 12 February 2026 by ScegliAuto


Related tutorials

Replacing the Intake Manifold Gasket
Replacing the Intake Manifold Gasket
Volvo S70 (1996-2000 / MK 1) Before applying the new gasket to the intake manifold, it is crucial to clean the surface on both the manifold and cylinder head sides, removing any …
Replacing the Starter Motor
Replacing the Starter Motor
Volvo S70 (1996-2000 / MK 1) This video demonstrates how to replace the starter motor on a Volvo 850. The same procedure applies to other Volvo models such as S70, V70, and XC70.…
Replacement of Window Regulator Switch
Replacement of Window Regulator Switch
Volvo S70 (1996-2000 / MK 1) The switches for the electric window regulators often get damaged due to the acidity of hand sweat or the use of some cleaning products that are too …

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos