Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Lock Actuator on a Volvo S60?

Model: Volvo S60 MK 2 - Years 2010-2018
Part: Door lock

To access the door lock actuator on the Volvo S60, loosen the Torx screws located just beneath the armrest. Once these are loosened, you can detach the panel and disconnect the connectors inside to access the underlying components. Next, loosen the side screws to remove the outer handle, and then loosen the screws that secure the inner door panel. The actuator will be attached to this panel and can be removed by loosening its screws and replacing it with a new one.

Updated on 13 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Open the Fuel Door on a Volvo S60
How to Open the Fuel Door on a Volvo S60
Volvo S60 (2000-2009 / MK 1) How do you open the stuck fuel door on a Volvo S60? Open the trunk to access the interior of the car. Remove the cover on the upper right side of the…
How do you reset the Service light on the Volvo S60?
How do you reset the Service light on the Volvo S60?
Volvo S60 (2000-2009 / MK 1) The Service light of the Volvo S60 is reset by holding down the button located on the left side of the instrument panel while the car is off. Next, i…
How to Remove the Door Panel of the Volvo S60?
How to Remove the Door Panel of the Volvo S60?
Volvo S60 (2010-2018 / MK 2) To remove the door panel of the Volvo S60, loosen the screws located at the center bottom of the panel, just below the armrest. Once these screws are…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos