Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on a 2015 Volvo S60?

Model: Volvo S60 MK 2 - Years 2010-2018
Part: Service warning light

To reset the service light on a 2015 Volvo S60, turn on the ignition and ensure the display shows the code T2 followed by its numerical value. Press the ignition button once, without starting the engine, then navigate to the "ok" button and hold it down. At the same time, also hold down the ignition button ("start/stop"). Continue to hold both buttons until you see an "I" flashing on the dashboard, and release them only when an audible signal indicates that the reset was successful.

Updated on 1 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Service Light on a Volvo S60
How to Reset the Service Light on a Volvo S60
Volvo S60 (2010-2018 / MK 2) To reset the service light on a Volvo S60, follow the steps shown in the video. First, turn on the ignition and repeatedly press the button next to t…
How to Reset the Service Light on a Volvo S60 MK2
How to Reset the Service Light on a Volvo S60 MK2
Volvo S60 (2010-2018 / MK 2) In this video, we show how to reset the service light on a Volvo S60 MK2. The procedure is quick and does not require special tools. Follow these ste…
How to Reset the Service Light on a Volvo S60
How to Reset the Service Light on a Volvo S60
Volvo S60 (2010-2018 / MK 2) In this guide, we will discover how to reset the service light for routine maintenance on the Volvo S60. First, get in the vehicle and start pressing…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos