Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Air Filter in a Volvo V70 (BW135)

Model: Volvo V70 MK 3 - Years 2007-2016
Part: Air filter

In this tutorial, you will learn how to replace the air filter in a Volvo V70 (BW135) 2.0 Station Wagon by following a few simple steps: first, purchase a new air filter from an authorised car parts dealer. Get inside the vehicle, turn off the engine, and pull the handbrake. Lift the bonnet and secure it with the prop rod; disconnect the mass air flow sensor connector; unscrew the fastening elements of the filter box cover (Torx T25); lift the filter box cover; remove the old filter element from its housing; clean the housing and cover (place a clean cloth inside the intake tube hole to prevent dirt from entering the system); insert the new filter element, remove the cloth, and refit all parts in reverse order.

Updated on 5 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Access the OBD2 Port on a Volvo V70
How to Access the OBD2 Port on a Volvo V70
Volvo V70 (2000-2007 / MK 2) In this short video tutorial, you will learn how to independently access the OBD2 location port on a Volvo V70. The OBD2 port is essentially the onbo…
How to Replace the Diesel Filter on the Volvo V70
How to Replace the Diesel Filter on the Volvo V70
Volvo V70 (2000-2007 / MK 2) To replace the diesel filter on the Volvo V70, lift the car with a jack or ramp to access the components located at the bottom of the engine bay: her…
What is the Fuse Diagram for the Volvo V70?
What is the Fuse Diagram for the Volvo V70?
Volvo V70 (2007-2016 / MK 3) In this video, we can see where the fuse boxes are located in the Volvo V70 and what their respective diagrams are, useful in case we need to check t…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos