Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Instructions for Replacing the Link

Model: Volvo Xc90 MK 1 - Years: 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Control arm

See other generations:
Video tutorial

Damage to the spherical joints of the links results in a noise that resembles a thumping sound, especially when driving on rough terrain; the link connects the stabilizer bar to the support bracket on the shock absorber: to replace it, you must lift the vehicle on a lift, remove the front wheel, and loosen the fastening nuts (hold the spherical joint axis with a hex wrench while loosening the nut); once the old link is removed, install the new one in the same manner: for a more effective result, it is recommended to replace both.


Updated on 16 February 2026 by ScegliAuto


Related tutorials

Instructions for Replacing the Link
Instructions for Replacing the Link
Volvo Xc90 (2002-2014 / MK 1) Damage to the spherical joints of the links results in a noise that resembles a thumping sound, especially when driving on rough terrain; the link co…
Guide to replacing the timing belt of the Volvo XC90
Guide to replacing the timing belt of the Volvo XC90
Volvo Xc90 (2002-2014 / MK 1) Today we will see the instructions that will allow us to dismantle and replace the timing belt of the Volvo XC90 (D5 Diesel engine); the manufacturer…
Guide to replacing the timing belt of the Volvo XC90 2.4L
Guide to replacing the timing belt of the Volvo XC90 2.4L
Volvo Xc90 (2002-2014 / MK 1) In this guide we will see the instructions for replacing the timing belt of the Volvo XC90 with a 2.4L engine; the manufacturer indicates that the ti…

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos