Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Oil Light on a Volvo XC60?

Model: Volvo Xc60 MK 2 - Years 2017-2026
Part: Service warning light

To reset the oil light on a Volvo XC60, turn on the vehicle's instrument cluster by pressing the appropriate button next to the steering wheel. Once the instrument cluster is on, press and hold the OK button located on the lever to the left of the steering wheel. While holding this button, also press and hold the START button used to turn on the instrument cluster. Keep both buttons pressed until an "i" appears on the instrument cluster. At this point, you can release the buttons to verify that the reset was successful.

Updated on 4 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Service Light on a Volvo XC60?
How to Reset the Service Light on a Volvo XC60?
Volvo Xc60 (2008-2016 / MK 1) To reset the Service light on a Volvo XC60, turn on the ignition and then connect a diagnostic tool to the vehicle's OBD port. This port is located o…
Resetting the Service Light on the Volvo XC60
Resetting the Service Light on the Volvo XC60
Volvo Xc60 (2008-2016 / MK 1) Follow the procedure to reset the service light for the regular maintenance of the engine oil change on the Volvo XC60. First, get in the vehicle and…
How to Reset the Oil Light on a 2010 Volvo XC60
How to Reset the Oil Light on a 2010 Volvo XC60
Volvo Xc60 (2008-2016 / MK 1) If you don't know how to manually reset the engine oil light on your first-generation Volvo XC60, don't worry because this guide describes all the st…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos