Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you reset the Service light on the Volvo XC60?

Model: Volvo Xc60 MK 1 - Years 2008-2016
Part: Service warning light

The Service light of the Volvo XC60 can be reset by inserting the key into the ignition switch, turning on the instrument panel with the button, and then navigating through the menu with the dial on the lever to the left of the steering wheel. With the OK button on the same lever, you can select the "T2" option and then the "Service status" option: here you must hold down the OK button and at the same time press the button to start the engine. This will bring up another screen showing the kilometers remaining until the next service: by holding down the OK button, you can turn off the light.

Posted on 3 November 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the "Service" Light on a Volvo XC60?
How to Reset the "Service" Light on a Volvo XC60?
Volvo Xc60 (2008-2016 / MK 1) Hello, today's guide aims to reset the "Service" light on your Volvo XC60. Before starting, ensure you have performed the recommended maintenance. Be…
How to Reset the Service Light on a Volvo XC60?
How to Reset the Service Light on a Volvo XC60?
Volvo Xc60 (2017-2026 / MK 2) Reset the Service light on a Volvo XC60 by connecting a diagnostic tool to the vehicle's OBD port, located just below the steering column. Once the s…
How to Reset the Service Light on a Volvo XC60?
How to Reset the Service Light on a Volvo XC60?
Volvo Xc60 (2008-2016 / MK 1) To reset the Service light on a Volvo XC60, turn on the ignition and then connect a diagnostic tool to the vehicle's OBD port. This port is located o…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos