Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Rear Headrests on the Volvo XC60

Model: Volvo Xc60 MK 1 - Years 2008-2016
Part: Checks and maintenance

The rear headrests can sometimes be bulky and obstruct the visibility of the driver. In this short video, we will see how to remove them from the Volvo XC60. This will also allow for the installation of a child seat. Here are the instructions. Remove the plastic cover with a flat screwdriver to access the three underlying Torx screws. Simply remove the three screws to easily take off the headrest. In its place, you can install a plastic cover that matches the color of the seats, so the difference won't be noticeable.

Updated on 25 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Rear Light of a Volvo XC60
Volvo Xc60 (2008-2016 / MK 1) Begin by opening the trunk of your Volvo XC60. Next, remove the cover located on the left inner side of the cargo area. Then, disconnect all the elec…
How to Remove the Rear Headlight of a Volvo XC60
Volvo Xc60 (2008-2016 / MK 1) Start by opening the trunk of your Volvo XC60, then remove the cover located on the inner side of the cargo area. Next, disconnect all the electrical…
How do you remove the rear taillight of the Volvo XC60?
How do you remove the rear taillight of the Volvo XC60?
Volvo Xc60 (2008-2016 / MK 1) The removal of the rear light of the Volvo XC60 is done by opening the rear door, so that it is possible to access the screws located next to the cor…

How to Replace the Battery on a Honda Vision 110

To replace the battery on a Honda Vision 110, you need to remove the front fairing of the motorcycle, located directly under the front headlamp. To loosen this panel, unscrew the two screws found at its top, just below the handlebar. Once these screws are loosened, lever under the panel to detach it, gaining access to the battery underneath: this battery must be removed from its housing by unscrewing the fixing screws and disconnecting the power cables, replacing it with a new one.

Watch the video!


by ScegliAuto

More videos