Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on the Volvo V50?

Model: Volvo V50 MK 1 - Years: 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012
Part: Service warning light

Video tutorial

To reset the Service light on the Volvo V50, press and hold the button located on the right side of the instrument cluster: the button must be held while the ignition is off. Next, insert the key and turn on the ignition, continuing to hold the button: a flashing "i" will appear in the centre of the display.

After the icon has flashed three times, you can release the button and turn off the instrument cluster; the light will be correctly reset when the instrument cluster is turned on again.


Updated on 28 August 2026 by ScegliAuto


Related tutorials

How to Reset the Service Light on a Volvo V50?
How to Reset the Service Light on a Volvo V50?
Volvo V50 (2004-2012 / MK 1) To reset the Service light on a Volvo V50, press and hold the TRIP button located on the lower side of the instrument cluster while it is off. While …
How do you reset the Service light on the Volvo V50?
How do you reset the Service light on the Volvo V50?
Volvo V50 (2004-2012 / MK 1) In order to reset the Service light of the Volvo V50, you need to connect a diagnostic tool to the OBD port of the vehicle: this port can be found on…
How to Reset the Service Light on a Volvo V50
How to Reset the Service Light on a Volvo V50
Volvo V50 (2004-2012 / MK 1) To reset the Service light on a Volvo V50, press and hold the button located on the right side of the instrument cluster while the cluster is off. Wh…

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos