Do it yourself
Frequently asked questions about cars and motorcycles

How to Reset the Oil Service Light on a Volvo XC60?

Model: Volvo Xc60 MK 2 - Years 2017-2026
Part: Service warning light

As seen in this tutorial, resetting the oil service light on a Volvo XC60 is a very simple and quick task. Before proceeding, ensure that you have completed the required scheduled maintenance work. Start by sitting inside the cabin, then insert the key but keep it in the initial position. Next, press and hold both the brake pedal and the "-" button located on the left side of the steering wheel, and simultaneously turn on the ignition. At this point, hold the pedal and the button until the yellow "i" on the display stops flashing.

Updated on 5 September 2026 by ScegliAuto

Video tutorial

Related tutorials

Volvo Xc60 (2008-2016 / MK 1) Start by opening the trunk of your Volvo XC60, then remove the cover located on the inner side of the cargo area. Next, disconnect all the electrical…
Volvo Xc60 (2008-2016 / MK 1) Begin by opening the trunk of your Volvo XC60. Next, remove the cover located on the left inner side of the cargo area. Then, disconnect all the elec…
Volvo Xc60 (2008-2016 / MK 1) In this tutorial, you will learn how to reset the tire light on a Volvo XC60. This operation is extremely simple and quick, and should be done only a…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos