Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the service on the Volvo V40?

Model: Volvo V40 MK 1 - Years 1995-2012
Part: Service warning light

Resetting the service on the Volvo V40 is a simple and quick operation. Before proceeding, ensure all required maintenance tasks are completed. Start by entering the cabin, then insert the key but leave it in the initial position. Press the button located on the dashboard, between the speedometer and the rev counter, and simultaneously turn on the instrument panel. Keep the button pressed until the service light stops flashing, then restart the vehicle.

Updated on 10 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to reset the Service light on the Volvo V40?
How to reset the Service light on the Volvo V40?
Volvo V40 (2012-2019 / MK 2) To reset the Service light on the Volvo V40, insert the key into the ignition switch, but do not turn on the instrument panel. Then, press and hold t…
How to Reset the Service Light on a Volvo V40?
How to Reset the Service Light on a Volvo V40?
Volvo V40 (2012-2019 / MK 2) To reset the service light on a Volvo V40, turn on the instrument cluster by turning the key, then press and hold the "OK" button located at the end …
How to Reset the Tyre Pressure Light on the Volvo V40?
How to Reset the Tyre Pressure Light on the Volvo V40?
Volvo V40 (2012-2019 / MK 2) To reset the tyre pressure light on the Volvo V40, turn on the ignition without starting the engine. Then, press the MY CAR button located on the cen…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos