Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Acura
    3. :
  3. Rdx
    4. : 2006-2012 (MK 1)

Acura Rdx Years 2006-2012 (MK 1)

Acura Rdx (2006-2012 / MK 1)
How to replace the battery of the Acura RDX key.
The replacement of the button battery inside the smart key of your first-generation Acura RDX (year 2006-2012) is as simple as following these quick and easy …read all…
Posted on 12 August 2023 by ScegliAuto
Acura Rdx (2006-2012 / MK 1)
Disassembly of the front bumper of the Acura RDX
We see below the main instructions for disassembling and replacing the front bumper of the Acura RDX. First of all, we open the bonnet and start removing all …read all…
Posted on 24 April 2023 by ScegliAuto
Acura Rdx (2006-2012 / MK 1)
How to replace the Led license plate bulb of the Acura RDX
In this video we will see how to replace the Led license plate bulb of the Acura RDX. First of all unscrew the screws of the plate and remove it to have access …read all…
Posted on 14 November 2022 by ScegliAuto
Acura Rdx (2006-2012 / MK 1)
How to restore oil life in an Acura RDX
In this video tutorial we can see how oil life can be restored in an Acura RDX by following a few simple steps: the first thing to do is vehicle maintenance …read all…
Posted on 19 October 2022 by ScegliAuto
Acura Rdx (2006-2012 / MK 1)
How to remove the Acura RDX door panel and speaker
In this short guide we will see how to remove and replace the front door panel and speaker of the Acura RDX. First we open the front door and begin to remove …read all…
Posted on 6 October 2022 by ScegliAuto
Acura Rdx (2006-2012 / MK 1)
How to know the fuse diagrams of an Acura RDX
The fuse box diagram inside the cabin of an Acura RDX automobile contains fuses assigned to: fuel pump, ACG, ABS/VSA, heated seats, fog lights, driver's seat …read all…
Posted on 12 December 2022 by ScegliAuto
Acura Rdx (2006-2012 / MK 1)
How do i replace the front brake pads on the Acura RDX?
In order to replace the front brake pads of the Acura RDX you have to go and jack up the car, so that the corresponding wheel is not in contact with the floor. …read all…
Posted on 14 September 2022 by ScegliAuto
Acura Rdx (2006-2012 / MK 1)
How to replace the battery in the remote control of the Acura RDX?
Replacing the remote control battery of the Acura RDX, as we can see in this tutorial, is an extremely simple and economical operation. To do this, we will …read all…
Posted on 2 August 2022 by ScegliAuto
Acura Rdx (2006-2012 / MK 1)
How to replace the spark plugs on the Acura RDX 2.3L Turbo
We see today in this guide, the instructions on how to remove and replace the spark plugs of the Acura RDX 2.3L Turbo engine. First of all, we open the engine …read all…
Posted on 5 July 2022 by ScegliAuto
Acura Rdx (2006-2012 / MK 1)
How to reset the Acura RDX Engine Oil Lifetime Percentage
The guide shows you how to reset the Acura RDX Mk1 service light. The first operation to carry out is to turn on the instrument panel and press the â € …read all…
Posted on 16 June 2022 by ScegliAuto
Roof Rack Bars (1) Battery (3) Spark plugs (1) Key (8) -board computer (1) Checks and maintenance (3) Air filter (4) Cabin air filter (1) Oil filter (1) Accessory Kit (1) Light bulb (1) Headlight bulb (1) License plate light (1) Door panel (2) Front bumper (1) Brake pads (1) Instrument cluster (2)

See also:

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos