Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Cabin Air Filter of the Alfa Romeo 147

Model: Alfa Romeo 147 MK 1 - Years: 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
Part: Cabin air filter

Video tutorial

To replace the cabin air filter of the Alfa Romeo 147, which traps impurities from outside and prevents them from entering the ventilation system, sit in the front passenger seat. Remove the three screws located under the glove compartment and take off the lower panel.

At the end of the centre tunnel, you will find the cover of the filter box secured by two screws. Once these are removed, you can take out the two sections of the filter element.

Insert two new filters in their place, ensuring the correct orientation, replace the cover, secure it with its screws, and reattach the panel.


Updated on 29 October 2026 by ScegliAuto


Related tutorials

Replacing Air Filter on Alfa Romeo 147
Replacing Air Filter on Alfa Romeo 147
Alfa Romeo 147 (2000-2010 / MK 1) Today, you will learn how to remove and replace the engine air filter on an Alfa Romeo 147 Twin Spark. First, open and lift the bonnet and unscrew th…
Replacing the engine air filter on the Alfa Romeo 147 JTDm
Replacing the engine air filter on the Alfa Romeo 147 JTDm
Alfa Romeo 147 (2000-2010 / MK 1) A clean engine air filter allows the engine to unleash its full power without hesitation, as it ensures all the air it needs. That said, in the case …
How to Replace the Air Filter of the Alfa Romeo 147
How to Replace the Air Filter of the Alfa Romeo 147
Alfa Romeo 147 (2000-2010 / MK 1) To replace the air filter of the Alfa Romeo 147, open the bonnet to access the components inside the engine bay. Here, in the area between the engine…

Other guides you may be interested in

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos