Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Alfa Romeo
    3. :
  3. 156
    4. : How to remove and replace the spark plugs on Alfa Romeo 156

Alfa Romeo 156 - Video tutorial

Model: Alfa Romeo 156 MK 1 - Years 1997-2007
Part: Spark plugs
Operation: How to remove and replace the spark plugs on Alfa Romeo 156

How to remove and replace spark plugs on Alfa Romeo 156? Let's see how to intervene: open the engine compartment and lift the front hood, put it in safety, disconnect the battery terminals. We remove the engine cover soundproofing panel; remove the coils on the engine head with a screwdriver or pliers and immediately afterwards unscrew the spark plugs with a socket wrench (let's pull them out of the head). We take the new spark plugs and accompany them with the socket wrench extension in the cylinder head, tighten them and connect the power coils to each spark plug with the new cables. We mount the engine cover and close the engine hood. We test their correct functioning.


Posted on 16 November 2023 by ScegliAuto



Replacing the valve cover gasket on the Alfa Romeo 156 1.8 Twin Spark
Alfa Romeo 156 (1997-2007 / MK 1) Let's see in this short and simple guide how to disassemble and replace the valve cover gasket on the Alfa Romeo 156, with 1.8 Twin Spark engine. Fir
How to replace the glow plugs on the Alfa Romeo 156 2.4 JTDM
Alfa Romeo 156 (1997-2007 / MK 1) In this video tutorial we will see how to remove and replace the engine glow plugs on the Alfa Romeo 156 2.4 JTDM, but also on the 159 with 1.9 JTDM
Alfa Romeo 156 1.9 JTD glow plug replacement guide
Alfa Romeo 156 (1997-2007 / MK 1) Let's see in this guide the steps on how to remove and replace the glow plugs on the Alfa Romeo 156 engine, with 1.9 JTD engine. First we open the en

Other guides that may interest you

Disassembly of the gear knob on the Lancia Ypsilon 2

Today we will see, in this video tutorial, how to remove and replace the gear knob on the second series Lancia Ypsilon, but also on the Lancia Musa, in simple and quick steps. We get inside the car and start by removing the old gear knob; to do this, just unscrew it anticlockwise, as shown in the video. At this point we also remove the gearshift gaiter, in order to replace, if necessary, it too; we just have to fix the new headset and insert the new gear knob, screwing it correctly and without creating play on the gear lever!

Watch the video!


by ScegliAuto

More videos