Do it yourself
Frequently asked questions about cars and motorcycles

Additional Chip Tuning Module Installation

Model: Alfa Romeo 145 MK 1 - Years: 1994, 1995, 1996, 1997, 1998, 1999, 2000
Part: Control unit

Video tutorial

Remove the plastic engine cover and locate the connector connected to the fuel supply system (it is near the brake fluid reservoir). Then disconnect the connector and create a bypass with the additional module, that is, connect the original wiring connector to the female of the additional module wiring and the male of the latter in place of the original connector: this way, the data related to fuel injection pressure will be processed, modifying them to provide a considerable power increase without necessarily intervening on the programming of the original ECU.


Updated on 5 February 2026 by ScegliAuto


Related tutorials

Ford Fiesta (2002-2008 / MK V, MK 5, Fiesta 5) For this operation, you need to obtain the control unit kit for the vehicle in question. Remove the connector from the installed control unit using a…
Alfa Romeo Mito (2008-2018 / MK 1) Open the front bonnet and ensure it is securely supported. Unclip the connector attached to the rail (located on the side, near the oil level dipstic…
Renault Scenic (2003-2009 / Scenic 2, MK 2) Obtain the control unit kit for the vehicle in question before proceeding. Remove the engine cover to access the installed control unit. Disconnect t…

How to open the bonnet on a Volkswagen Golf?

In this tutorial, you will see how to open the bonnet on a Volkswagen Golf MK4. This is a very simple operation that follows the standard procedure. First, open the driver's door, then locate the lever in the lower left area and pull it. Next, move to the front of the vehicle, lift the bonnet slightly, and find the second lever located just above the Volkswagen logo. At this point, simply pull it towards you, fully open the bonnet, and secure it with the prop rod. To close it, gently push it down.

Watch the video!


by ScegliAuto

More videos