Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Resetting Service Light on Alfa Romeo GT

Model: Alfa Romeo Alfa Romeo Gt MK 1 - Years: 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
Part: Service warning light

Video tutorial

Insert and turn the key to switch on the ignition. Using the buttons located to the left and slightly below the dashboard (the plus and minus buttons), access the section that indicates it is time for a service.

Great! For this operation, you will need to purchase the appropriate diagnostic cable, as shown in the video. Connect the cable to your laptop and to the OBD port located at the bottom left, under the fuse box (you need to remove the small cover with a screwdriver or plastic lever), and at this point, you can reset it using the software.

Unfortunately, there are no simpler procedures for this car.


Updated on 22 April 2026 by ScegliAuto


Related tutorials

Reset Service on Alfa Romeo GT
Reset Service on Alfa Romeo GT
Alfa Romeo Alfa Romeo Gt (2003-2010 / MK 1) To reset the service on an Alfa Romeo GT, follow these steps. Enter the vehicle and turn on the instrument cluster using the ignition key next to the…
How to replace the thermostat of the Alfa Romeo GT 1.9 JTD
How to replace the thermostat of the Alfa Romeo GT 1.9 JTD
Alfa Romeo Alfa Romeo Gt (2003-2010 / MK 1) The steps outlined in this guide will show us how to disassemble and replace the engine coolant thermostat of the Alfa Romeo GT 1.9 JTD. First, we op…
How to replace the battery of the Alfa Romeo GT remote control?
How to replace the battery of the Alfa Romeo GT remote control?
Alfa Romeo Alfa Romeo Gt (2003-2010 / MK 1) In this tutorial we can see how to replace the battery of the remote control of the Alfa Romeo GT, an extremely simple and quick operation. To do thi…

Other guides you may be interested in

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos