Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Front Wheel Bearing on the Alfa Romeo Mito

Model: Alfa Romeo Mito MK 1 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Bearing

Video tutorial

This guide shows you how to remove and replace the front wheel bearing on the Alfa Romeo Mito, following the instructions below. First, lift the vehicle and remove the front wheel; then, unscrew the pin of the front arm to disconnect it, as shown in the video.

At this point, extract the bearing from its housing using a puller if possible; replace the bearing with the new one, ensuring it is seated correctly. Finally, reassemble everything by reversing the disassembly procedure!


Updated on 11 May 2026 by ScegliAuto


Related tutorials

Replacement of the rear light of the Alfa Romeo Mito
Replacement of the rear light of the Alfa Romeo Mito
Alfa Romeo Mito (2008-2018 / MK 1) Today we will see the instructions that will allow us to disassemble and replace the rear light of the Alfa Romeo Mito. First, we open the rear hatch…
Where is the fuse box located on an Alfa Romeo Mito?
Where is the fuse box located on an Alfa Romeo Mito?
Alfa Romeo Mito (2008-2018 / MK 1) There is usually a dedicated fuse diagram for your Alfa Romeo Mito that allows you to identify the precise positions of the fuses. Once found, you do…
Replacing the Boot Button on the Alfa Romeo Mito
Replacing the Boot Button on the Alfa Romeo Mito
Alfa Romeo Mito (2008-2018 / MK 1) In this video tutorial, we will see how to remove and replace the boot opening and closing button on the Alfa Romeo Mito in simple steps. First, open…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos