Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Guide to Engine Oil Replacement and Service Reset for the Alfa Romeo Giulia

Model: Alfa Romeo Alfa Romeo Giulia MK 1 - Years: 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024
Part: Warning light – error code

See other generations:
Video tutorial

Follow this guide for instructions on performing routine maintenance on the Alfa Romeo Giulia by replacing the engine oil, oil filter, and resetting the service light. First, lift the vehicle and remove the oil drain bolt located under the engine to allow the oil to drain.

Next, unscrew the oil filter and replace it with a new one, then top up the oil. Now, to complete the process, connect your diagnostic tool, select the make, model, and engine type, and follow the procedure to reset the light!


Updated on 26 May 2026 by ScegliAuto


Related tutorials

How to reset the Service light on the Alfa Romeo Giulia?
How to reset the Service light on the Alfa Romeo Giulia?
Alfa Romeo Alfa Romeo Giulia (2016-2024 / MK 1) To reset the Service light on the Alfa Romeo Giulia, connect a diagnostic tool to the vehicle's OBD port, which is located on the lower left side of …
How do you reset the service light on the Alfa Romeo Giulia?
How do you reset the service light on the Alfa Romeo Giulia?
Alfa Romeo Alfa Romeo Giulia (2016-2024 / MK 1) At a certain point, we notice the service light turning on in our Alfa Romeo Giulia. Nothing serious, it simply serves as a reminder that the schedul…
Resetting the Service Light on Alfa Romeo Stelvio, Giulia
Resetting the Service Light on Alfa Romeo Stelvio, Giulia
Alfa Romeo Alfa Romeo Giulia (2016-2024 / MK 1) In this video tutorial, you will see how to reset the service light for routine maintenance on an Alfa Romeo Giulia, as well as on the Stelvio. First…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos