Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Alfa Romeo
    3. :
  3. Mito
    4. : How to replace the glow plugs in an Alfa Mito 1.6 JTDM 120 HP.

Alfa Romeo Mito - Video tutorial

Model: Alfa Romeo Mito MK 1 - Years 2008-2018
Part: Glow plugs
Operation: How to replace the glow plugs in an Alfa Mito 1.6 JTDM 120 HP.

In this video tutorial we can see how to replace the glow plugs in an Alfa Mito 1.6 JTDM 120 HP by following a few simple steps: Lift the bonnet and secure it with the appropriate rod; remove the engine cover, locate the 4 glow plug connectors, release the connectors by pulling them firmly upwards (if they are hard to remove, you can help yourself with ordinary pliers). Apply the WD-40 lubricant to the base of the glow plugs and wait a few minutes, then gently unscrew the 4 glow plugs counterclockwise. Now you can install the new glow plugs; screw the new glow plugs clockwise, without tightening too much.


Posted on 11 April 2023 by ScegliAuto

    Frequently Asked Questions

    • Mito 2008-2018 - What does the warning light with two spirals indicate in the Alfa Romeo MiTo? Read Answer

How to open the bonnet of the Volkswagen Polo

Let's see in this short and simple guide the instructions that will allow us to open the bonnet of the Volkswagen Polo. First of all we open the front door, on the driver's side, and start pulling the opening lever of the engine hood, in order to open the lock; then let's move to the front of the vehicle and unhook the tab that we find on the central part, above the manufacturer's emblem, as shown in the video. At this point we block the bonnet with the lateral rod; then we accompany the bonnet down to close it again!

Watch the video!


by ScegliAuto

More videos