Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Alfa Romeo
    3. :
  3. 147
    4. : How to replace the window regulator on Alfa Romeo 147

Alfa Romeo 147 - Video tutorial

Model: Alfa Romeo 147 MK 1 - Years 2000-2010
Part: Window lift button
Operation: How to replace the window regulator on Alfa Romeo 147

To reach the push button panel it will obviously be necessary to remove the door panel, to do so it will be necessary to remove the cap behind the handle in order to then unscrew the screw located on the back of the cap, then disconnect the pins on the back of the handle, consequently remove also the other screws indicated in the video, now the moment will come in which you can remove the keypad in question, you just need to lift the keypad and disconnect the plugs on the bottom, then make the necessary replacements and retrace the steps backwards for reassembly.


Posted on 26 September 2023 by ScegliAuto

This video is currently unavailable


How to remove Alfa Romeo 147 window regulator button
Alfa Romeo 147 (2000-2010 / MK 1) How to remove the window control panel located on the passenger side panel of an Alfa Romeo 147? This video explains how to proceed. Before starting
How to remove the front bumper of an Alfa Romeo 147
Alfa Romeo 147 (2000-2010 / MK 1) Before starting, we will have to open the front hood of our Alfa Romeo 147. So let's start by unscrewing and removing all the screws and all the bolt
Where is the Alfa Romeo 147 fuse box located
Alfa Romeo 147 (2000-2010 / MK 1) If you cannot find the position in which the fuse box of your Alfa Romeo 147 is installed then all you have to do is pay attention to the following m

Other guides that may interest you

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos