Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Alfa Romeo
  4. :
  5. 156
  6. : How to remove the rear bumper of the Alfa 156

Alfa Romeo 156 - Video tutorial

Model: Alfa Romeo 156 MK 1 - Years 1997-2007
Part: Rear bumper
Operation: How to remove the rear bumper of the Alfa 156

The disassembly of the rear bumper of the Alfa Romeo 156 is quite simple to carry out and you start by opening the rear bonnet to exceed the first fixing screws which are located right along the closing line of the bonnet itself; then move on to the screws present along the edge of the passaruta to then access the inside of the luggage compartment and remove the carpet covering to access the last fixing screws of the external bands of the bumper, on both sides; finally, the disassembly will be completed by removing the screws present along the lower band of the bumper itself.


Posted on 27 September 2023 by ScegliAuto



Disassembly of the front bumper of an Alfa 156
Alfa Romeo 156 (1997-2007 / MK 1) Is the bumper of the Alfa Romeo 156 damaged and cannot be repaired? Let's see how the car is removed from above. We open the front hood; we remove th
Removing the Alfa Romeo 156 bumper
Alfa Romeo 156 (1997-2007 / MK 1) In this video tutorial we will see how to remove the front bumper of an Alfa Romeo 156. Let's start by opening the bonnet of the car: with a screwdri
Remove Alfa 156 bumper
Alfa Romeo 156 (1997-2007 / MK 1) Remove the front bumper of the Alfa 156? We disassemble the bumper and all its parts from the front of the car. Let's lift the bonnet and put it in s

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos