Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the cabin heater radiator of the Audi A6

Model: Audi A6 MK 2, C5 - Years 1997-2004
Part: Heater core

Today's steps will show us the useful directions for disassembling and replacing the heater radiator of the Audi A6's cabin. First of all, we get on board the car and start disassembling and removing the entire dashboard in order to access the heating matrix; to do this, we remove the tunnel and the central console, removing the radio and air conditioning controls, as shown in the video. At this point, we also remove the steering wheel and the glove compartment, thus removing the dashboard; we disconnect the heating matrix and replace the radiator, following the video tutorial until the end!

Posted on 21 August 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Install the Heater Core on an Audi A6
How to Install the Heater Core on an Audi A6
Audi A6 (1997-2004 / MK 2, C5) In this video, see how to install the heater core on an Audi A6. Insert the new heater core into the housing where the old one was removed, and tight…
Replacing the Cabin Heater Valve
Replacing the Cabin Heater Valve
Audi A6 (2004-2012 / MK 3, C6) The flow of coolant through the cabin heater radiator is controlled by electric valves managed by the automatic climate control unit. Depending on th…
How to find the fuse diagram of an Audi A6
How to find the fuse diagram of an Audi A6
Audi A6 (2018-2026 / MK 5, C8) In the selected video, you can observe the fuse diagram present in an Audi A6 car. The first two fuse panels are located inside the vehicle's cabin a…

Other guides you may be interested in

How to Remove the Centre Console on a Renault Scenic

Watch this video to learn how to remove the glove compartment from the rear cover of the centre console on a Renault Scenic. Use a plastic lever to pry at the edge of the side plastics as shown in the video. Once the plastics are removed, unscrew the screws located at the sides of the centre console with a suitable screwdriver, and disconnect all the power connectors. Remove the side rests from the glove compartment. Fit the new piece onto the centre cover and proceed with the assembly of the remaining parts, working in reverse order.

Watch the video!


by ScegliAuto

More videos