Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the inspection of the Audi A4

Model: Audi A4 B7 - Years 2004-2008
Part: Onboard computer

To reset the service of the Audi A4, we start by holding down the wrench button and simultaneously turning on the instrument panel without starting the car's engine. The display on the instrument panel will show the word "inspection". Then we press the button to the right of the wrench button to display the words with dashes next to the kilometers and days. Now we can turn off the instrument panel and the reset is complete; we can perform this operation every time the car asks us to perform a service or inspection. Finally, we can turn on the instrument panel again and check if the reset has been successful.

Posted on 17 October 2024 by ScegliAuto

Video tutorial

Related tutorials

How to reset the inspection light on a 2017 Audi A4 vehicle
How to reset the inspection light on a 2017 Audi A4 vehicle
Audi A4 (2014-2024 / B9) Resetting the inspection light on a 2017 Audi A4 is a very simple and quick operation to perform independently, thanks to our short video tutorial. T…
Replace the Headlight Bulbs on an Audi A4
Replace the Headlight Bulbs on an Audi A4
Audi A4 (2007-2016 / B8) Want to replace the headlight bulbs on an Audi A4 but don't know how? Let's go through the steps together. Open the hood by pulling the lever located…
When to change the timing belt of an Audi A4 Avant 2.0 190 hp
When to change the timing belt of an Audi A4 Avant 2.0 190 hp
Audi A4 (2014-2024 / B9) In this video we can see an Audi A4 Avant 2.0 190 hp, which has not yet reached the parameters for the belt change, which would be 210,000 km or 5 ye…

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos