Do it yourself
Frequently asked questions about cars and motorcycles

How to disassemble, repair and reassemble the windshield washer nozzle of the Audi A3 MK2.

Model: Audi A3 Sportback MK 2 - Years: 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Windshield washer nozzle

See other generations:
Video tutorial

In this video we can see how to remove, repair and reassemble the windshield washer nozzle of an Audi A3 Sportback MK2: the youtuber could hear the motor running, but the spray was not coming out, so he suspected a fault in the nozzle. We remove the cover being careful not to break the plastics.

Underneath we find the nozzle, which we can lift by levering with a small screwdriver; in fact inside we find a lot of rust, resulting from the fact that the car has been stationary for a long time, and the nozzle has not worked in the meantime. On the nozzle there is the part code if we intend to buy it new. The rear wash was activated to see if the water was coming correctly; if not, we would have had to check under the car, to highlight any water leaks, near the wheel arch, which needs to be removed to reattach the hose, which may have come loose.

For cleaning we will need a thin needle, to clean inside the nozzles: but be careful not to break the tip of the needle inside! Once the nozzle is clean, put it back in place by pressing firmly, then reattach the cover and now let's do a test: it works but it's off target.

We can try to adjust the direction, wetting the tip of the needle to give the desired direction and trying again.


Posted on 17 February 2025 by ScegliAuto


Related tutorials

Audi A3 Sportback (2003-2013 / MK 2) This video demonstrates the removal of the rear wiper and the washer fluid nozzle. As with any maintenance task on a vehicle, it is advisable to plac…
Audi A3 Sportback (2003-2013 / MK 2) Today, you will learn how to remove the window regulator from your Audi A3 Sportback. Start by opening the rear door. Use a flathead screwdriver to p…
Audi A3 Sportback (2003-2013 / MK 2) To remove the rear glass, first remove the door panel. The first screw is located just below the armrest, at the height of the window lift button. Th…

Other guides you may be interested in

How to open the bonnet on a Volkswagen Golf?

In this tutorial, you will see how to open the bonnet on a Volkswagen Golf MK4. This is a very simple operation that follows the standard procedure. First, open the driver's door, then locate the lever in the lower left area and pull it. Next, move to the front of the vehicle, lift the bonnet slightly, and find the second lever located just above the Volkswagen logo. At this point, simply pull it towards you, fully open the bonnet, and secure it with the prop rod. To close it, gently push it down.

Watch the video!


by ScegliAuto

More videos