Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you adjust the headlights of the Audi A4?

Model: Audi A4 B8 - Years 2007-2016
Part: Headlight

It will be possible to adjust the headlights of the Audi A4 by opening the hood to access the engine compartment: to do this, you will need to pull the lever located on the lower left side of the dashboard compared to the steering column. By pulling this lever, you will notice that the hood lock will be unlocked and it will be possible to lift it: now you will be able to locate the screw corresponding to the headlight group. By tightening this screw, you will notice that the beam of light will be raised, on the contrary, by loosening it, you will notice that the beam will be lowered.

Posted on 22 May 2025 by ScegliAuto

Video tutorial

Related tutorials

How do you adjust the headlights of the Audi A4?
How do you adjust the headlights of the Audi A4?
Audi A4 (2004-2008 / B7) To adjust the headlights of the Audi A4, you need to open the hood so that you can access the components in the front part of the engine compartment:…
Guide to Installing Xenon Headlights
Guide to Installing Xenon Headlights
Audi A4 (2000-2004 / B6) This guide shows how to install an aftermarket xenon headlight kit. Provided that the installation complies with legal requirements set by traffic re…
Removing Headlights on A4
Removing Headlights on A4
Audi A4 (2007-2016 / B8) Removing the front headlights on an Audi A4. Open and lift the hood. Remove the upper screws located above the front headlight. Once all the headligh…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos