|
Do it yourself
| |||
| ||||
|
These short and simple steps will illustrate the process of disassembling and replacing the wheel of the Audi Q5. First of all, we take the wheel replacement kit from the trunk; then we lift the car using the jack, and unscrew the wheel bolts with the appropriate key, as shown in the video. At this point, we remove and replace the wheel with the spare one; we secure the wheel properly, screwing the bolts in a crisscross pattern, gently lower the jack, and reposition the entire wheel replacement kit in the trunk, following the video tutorial until the end!
Posted on 6 June 2025 by ScegliAuto
Video tutorial
Related tutorials
Audi Q5
(2017-2025 /
80A, MK 2)
In this video tutorial we will see the instructions to remove and replace the wheel, whether front or rear, on a second series Audi Q5. First of all …
Audi Q5
(2008-2017 /
8R, MK 1)
Have we never changed the wheel on our Audi Q5? We don't even know where it is? Let's see, open the trunk and take the wheel removal kit which includ…
Audi Q5
(2008-2017 /
8R, MK 1)
Let's see the replacement of the rear pads of the Audi Q5. We disassemble the wheel before replacing the brake pads on the car. We lift the car on a …
Other guides you may be interested in
|
Installation of Upgraded Intercooler Radiator with Pipes
Lift the vehicle on suitable axle stands, remove the front wheels, and then the front bumper and grille. Proceed to remove the front headlights; drain the coolant, remove the intercooler radiator and the hoses connecting it to the intake system. Position the new intercooler radiator in the grille, temporarily securing it with cable ties, and mark with a marker the part of the metal that needs to be removed to allow the new hoses to pass through. Cut the marked portion of metal and apply a gasket to the edge. Remove the inner cover of the bumper and position it near the radiator to identify any interfering parts to eliminate: again, apply a gasket to the edge of the cut. Create brackets for securing the new radiator and proceed with the installation of the connecting pipes from the radiator to the intake, shaping and connecting them appropriately. Finally, reassemble the bumper, headlights, and grille. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.094
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
