Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the rear headlight bulbs in the Audi TT?

Model: Audi Tt 8N, MK 1 - Years 1998-2006
Part: Tail light bulb

In this tutorial we can see how to replace the rear light bulbs in the Audi TT, an extremely simple and quick operation. First of all, make sure that the key is not inserted, then open the rear hatch, locate the small circular plug on the carpet, at the same height as the headlight in question, and open it as well. Then find a screwdriver with a flat tip, unscrew the bolt just released and separate the headlight from the body by pulling it outwards. At this point, all that remains is to disconnect the power connector, replace the faulty bulb, and reassemble everything.

Posted on 22 July 2025 by ScegliAuto

Video tutorial

Related tutorials

How to replace the front headlight bulbs in the Audi TT?
How to replace the front headlight bulbs in the Audi TT?
Audi Tt (1998-2006 / 8N, MK 1) In this tutorial we can see how to replace the front headlight bulbs in the Audi TT, a very simple and quick operation. First of all, make sure that …
Replacing Rear Bulbs on Audi TT
Replacing Rear Bulbs on Audi TT
Audi Tt (1998-2006 / 8N, MK 1) Open the trunk door and look inside from the side: you will notice that there are two access panels (one on each side) within the frame. Open them us…
How to Replace the Reverse Light Bulbs in an Audi TT?
How to Replace the Reverse Light Bulbs in an Audi TT?
Audi Tt (1998-2006 / 8N, MK 1) In this tutorial, you will see how to replace the reverse light bulbs in an Audi TT, a very simple and quick operation. First, ensure the key is not …

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos